Livraison gratuite au-dessus de 25 euros
Commandé avant 15:00, livré le lendemain (en NL, DE, BE)
Option de retour de 30 jours

Connecting Innr Remotes with Philips Hue

How to connect the Smart Button (RC 210) and the Remote Control (RC 250) with your Philips Hue Bridge

You can connect your Innr Smart Button and Remote Control to a Philips Hue Bridge. How? Just keep reading.

 

Innr Remote Control Smart Button Smart Switches

Connecting the Innr Smart Button to the Philips Hue Bridge

  1. Remove the plastic tab on the back of the Smart Button.
  2. Put the remote in pairing mode by pressing the reset button for 3 seconds.
    You will find this button on the back of the remote; remove the cover and you will see the battery and the reset button. When the LED blinks once per second, the remote has been successfully reset.
  3. Search for a lamp with the Philips Hue app. When connection is successful, the LED on the Smart Button will blink fast 2 times.
    The button is now connected to the Philips Hue Bridge, but the Philips Hue app does not find a lamp nor it will become visible in the app.

After this, you can connect the button to the light(s) of your choice.

Connecting the Innr Smart Button to a smart light

  1. Turn the light off for at least 5 seconds using the light switch and turn it on again. The light is in pairing mode for 1 minute from now.
  2. Hold the Smart Button close to the lamp you want to connect.
  3. Press the Smart Button 3 times (next press within 0.25 seconds) and hold the third press for 3 seconds. The LED on the Smart Button will blink once per second.
    A lamp from Innr or Philips Hue blinks when connection is successful. If you have a lamp from another brand, the reaction of the lamp when connection is successful may vary.

Repeat these steps for all the lights you would like connected to your Smart Button.
You can now control the connected light(s) from the app and with the Smart Button.

Smart Button Smart Switch hands manual wireless control

 

Connecting the Remote Control to the Philips Hue Bridge

  1. Remove the plastic tab from the back of the Remote Control.
  2. Put the remote in pairing mode by pressing the reset button for 3 seconds.
    You will find this button on the back of the remote; remove the cover and you will see the battery and the reset button. When the LED blinks once per second, the remote has been successfully reset.
  3. Search for a lamp with the Philips Hue app. When connection is successful, the LED on the remote will blink fast 2 times.
    The remote is now connected to the Philips Hue Bridge, but the Philips Hue app does not find a lamp nor it will become visible in the app.

After this, you can connect the remote to the light(s) of your choice.

Connecting the Innr Remote Control to a smart light

  1. Turn the light off for at least 5 seconds using the light switch and turn it on again. The light is in pairing mode for 1 minute from now.
  2. Hold the Remote Control close to the lamp you want to connect.
  3. Press the middle button and the button with the big sun and hold for 3 seconds. The LED on the Remote Control will blink once per second.
    A lamp from Innr or Philips Hue blinks when connection is successful. If you have a lamp from another brand, the reaction of the lamp when connection is successful may vary.

Repeat these steps for all the lights you would like connected to your Remote Control.
You can now control the connected light(s) from the app and with the Remote Control.

Remote Control Smart switch hands manual wireless control
0
    0
    Your Cart
    Your cart is emptyReturn to Shop